Logo
Login Register
     
 
My Picture

Blog article by hotairstenterlicheng

hotairstenterlicheng wrote 1 articles and got 0 comments. The last article was submitted on 04/28/19

hotairstenterlicheng's gallery | Browse all blogs

   
Spacer
 
Spacer
  Heat Setting of Hot Air Stenter Machine II

Date Sunday, April 28th 2019, 9:46 AM; Icon 116; Date 0; Attitude +0 | 0 | -0

The Hot Air Stenter Machine, a piece of equipment in the textile printing and dyeing factory, is used for stretching and tensioning the fabric by heating and stretching.

The heat setting of the fabric is usually a process in which the fabric is kept at a certain size and heated under a certain temperature and humidity for a certain period of time and then cooled. Therefore, the main process conditions for heat setting are nothing more than temperature, time, tension, etc. In the previous news, we introduce temperature, time in detail. Now, I will introduce the temperature for you.

The tension of the fabric during the heat setting process has a certain influence on the setting quality, including the dimensional thermal stability, strength and elongation at break of the fabric.

The thermal stability of the warp direction increases with the increase of the warp overfeed during the setting, while the thermal stability of the weft dimension decreases as the degree of stretch of the web increases.

After setting, the average single yarn strength of the fabric is slightly higher than that of the unshaped, and the latitudinal change is more obvious than the warp direction.

After the styling, the elongation at break of the fabric decreases, and the latitude decreases as the degree of stretching increases, while the warp direction increases as the overfeed increases.

Therefore, in order to obtain a good dimensional thermal stability of the fabric and to improve the wearing performance of the fabric, the warp direction should be properly over-fed during heat setting, and the latitudinal stretch should not be too high. For this reason, it is required that a large warp tension is not used in the pretreatment so as to avoid excessive elongation and a large contraction of the latitude, so that a larger stretch is finally required.

LiCheng is the leading manufacturer of high-end Flat Screen Printing Machine and hot air stenter machine. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force. If you interested in our products, please feel free contact any time:

Our Company: Zhejiang LICHENG Printing&Dyeing Machinery Technology Co.,Ltd

Website: www.hotairstenter.com



Spacer
   
  Write blog articles
Spacer
 

Comments on this blog article

Spacer Spacer
 
Sorry there is no comment on this blog article yet. Would you like to be the first one to write a comment?
Spacer
 
 

Drop your comment for this article

Spacer Spacer
Spacer
  Sorry, guests can not post comments | Register
   

Search my blog

 


hotairstenterlicheng articles

 

Would you like to read more articles written by hotairstenterlicheng? Here are the latest posts.

Sorry hotairstenterlicheng doesn't have any other blog articles

 
Spacer
Important References
Contact us / Report Abuse
Bookmark us
Privacy policy & terms of use